- Type: Metal Film
- Tolerance: ± 1%
- Rated Power: 0.25 (1/4) W
- Available Value: 1, 10, 100 1K, 10K, 100K, 1M ohm
- Can be used for Arduino breadboard.
- A popular choice for construction or repair.
- High quality
- Durable and reusable.
- 40pcs chromatic color male to female dupont cables.
- Easy to install and use
- Charging current: 1A Adjustable (Through 1.2k R3 RPROG Resistor)
- Charge Accuracy: 1.5%
- Input voltage: 4.5V-5.5V
- Full charge voltage: 4.2V
- Over discharge / Deep Drain protection voltage: 2.5V
- Over-current protection: 3A
- Working temperature: -10 Degree to +85 Degree
Specification:
- Suitable model: AA / AAA / 3.7V 18650 / 9V
- Material: Plastic
- Color: Black
- Uses: DIY robot, DIY car model
- Cable: 15cm
Disclamer : 9V battery holder is without wire
- Can be used for Arduino breadboard.
- A popular choice for construction or repair.
- High quality
- Can be used for Arduino breadboard.
- A popular choice for construction or repair.
- High quality
- Temperature: 155 degrees celcius
- Type : insulated
- Color : reddish brown
- Usages: electrical tools, ballasts, automative electronics, refrigerator, air conditioner compressor motors, television sets, electric stove, microwave ovens, various transformers, other kinds of electronic motors and electrical appliances.
- Advantages: high conductivity of electricity, good heat dispering performance.
Material: SUPER STRONG Neodymium Magnet
- Can be used for Arduino breadboard.
- A popular choice for construction or repair.
- High quality
- Can be used for Arduino breadboard.
- A popular choice for construction or repair.
- High quality
- Type : Linear
- Family : WH148 series
- Power Rating: 0.25W
- Able to make adjustments for resistance value
- Easy to grip and turn
- Suitable for breadboard prototypes
- Type: PURE copper single core
- AWG: 22
- Inner Diameter: 0.5mm
- Outer Diameter : 1mm
- Rated Voltage: 300V
- Rated Temperature : 105 °C
- Insulator : PVC
- Color : Black, Red, Blue, Green, Yellow, White
- 5mm diameter
- 660 nm wavelength
- 250 mcd typical brightness
- Smooth surface paired with high mechanical strength and toughness
- Anti-static, ESD stainless steel.
- High purity - clean room compatible
- High abrasion resistance
- Excellent chemical resistance to most acids and solvents
Typical applications:
- Handling of scratch sensitive samples
- Cleaning and etching processes
- Handling of static and/or static-sensitive components
- Handling of soft specimens
- Handling of magnetic specimens
- 830 tie points
- 630 tie-point terminal strip
- 200 tie-point distribution strips
- 20~29 AWG (0.3mm ~ 0.8mm) wires
- Prototype circuit designs
-
1N5408
General Purpose Rectifier allows current to flow in one direction, which is used in full wave rectification or half wave rectification, conversion from alternating current to direct current.
V(RRM) Maximum Repetitive Reverse Voltage : 1000 V
I(f) Average Rectified Forward Current : 3.0 A
I (FSM) Non-repetitive Peak Forward Surge Current : 8.3 ms
Single Half-Sine-Wave : 200 A
T(stg) Storage Temperature Range : -55 to +150 °C
T(j) Operating Junction Temperature : -55 to +150 °C
P(d) Power Dissipation : 6.25 W
R Thermal Resistance, Junction to Ambient : 20 °C/W
VF Forward Voltage @ 3.0 A : 1.2 V
Irr Maximum Full Load Reverse Current, Full Cycle TA = 105°C : 0.5 mA
IR Reverse Current @ rated VR TA = 25°C TA = 100°C : 500 uA
Total Capacitance VR = 4.0 V, f = 1.0 MHz : 30 pF
1N4001/1N4007
This is a simple, very common rectifier diode. Often used for reverse voltage protection, the 1N4007 is a staple for many power, DC to DC step up, and breadboard projects. 1N4007 is rated for up to 1A/1000V.
- Aluminium Electrolytic Capacitor
- Project application